Bolt And Nut Forging Medium Frequency Heating Equipment

Bolt and nut forging medium frequency heating equipment The main application scope of the equipment is as follows: bending, pier head, punching and boring of forming parts; deformation of pipe fittings, bending of brackets, stretching of steel pipe boring heads, various round steels, various square steels, bar stocks, round cakes, Pipes, steel plates, steel rings, fasteners,
Chat Now

Product Details


Bolt and nut forging medium frequency heating equipment
The main application scope of the equipment is as follows: bending, pier head, punching and boring of forming parts; deformation of pipe fittings, bending of brackets, stretching of steel pipe boring heads, various round steels, various square steels, bar stocks, round cakes, Pipes, steel plates, steel rings, fasteners,
high-strength bolts and nuts, bolts and nuts, bearings, bearing rings, flanges,
cross shafts, camshafts, half shafts, flange forks, universal joints, etc.
Hot forging.

Bolt and nut forging medium frequency heating equipment
One. XXZP-200 medium frequency heating machine, medium frequency diathermy equipment application range:
1. Scope of application: through-heat forging of round steel, square steel, bar and other materials with a diameter of 60mm or less.
2. Production beat: The output is 500 kg per hour and the power consumption is 320-360 kWh per ton.

two. Main technical parameters and characteristics of XXZP-200 intermediate frequency heating machine and medium frequency diathermy equipment:
Model: XXZP-200
Power supply: three-phase 380V 50-60Hz
Input power: 200KW
Medium frequency range: 2-8KHz
Duty rate: 100%
Input current: 300 A
Dimensions mm: Main control cabinet: 530 × 760 × 1660
Transformer cabinet: 500×800×580
Main features of the equipment: small size, high power, fast heating, core penetration, and electricity saving.
Power saving situation: Compared with the old thyristor intermediate frequency, the thyristor medium frequency heating uses about 470 degrees of electricity per ton of workpiece. Our new medium frequency power consumption is about
350 degrees.
More than 100 kWh of electricity per ton of burning. As long as you burn about 500 tons, you can recover
the equipment investment by saving electricity.

Circuit characteristics: The main device adopts IGBT module, and the circuit adopts uncontrolled full-bridge rectification, capacitance filtering, bridge inverter, and series resonance output. There is a fundamental difference between the use of
thyristor parallel resonance and the old-fashioned intermediate frequency.

Power saving principle: Uncontrolled rectification, the rectifier circuit is fully conductive. High power factor, voltage type series resonance, etc., determine the device to save a lot of power.


Inquiry