Energy-saving bearing ring intermediate frequency forging induction heating equipment
The equipment is also called: medium frequency heating machine, medium frequency furnace, bearing ring through-heating forging equipment, iron bar forging heating equipment, round steel forging heating equipment, cross shaft forging heating equipment, the same process is called the same.
The through-heat forging equipment adopts our medium-frequency diathermy forging equipment or medium-frequency heating equipment.
The medium-frequency diathermy forging equipment is suitable for through-heat forging of round steel, square steel and bar with diameter below 60mm. Production beat: 400-500 kg per hour and power consumption is 320-360 kWh per ton.
The main technical parameters of IGBT intermediate frequency induction heating equipment are as follows:
Equipment model: XXZP-200
Input voltage: three-phase 380V 50-60Hz
Input power: 200KW
Oscillation frequency: 2-8KHz
The main configuration of the complete set of equipment includes: one set of main control cabinet (one transformer with two pairs of sensors, B, or one furnace plus pneumatic material)
Pneumatic feeding device: simple structure, convenient installation, accurate control, flexible production cycle.
Energy-saving medium-frequency forging diathermy equipment _ main features of the intermediate frequency heating machine:
1. Adopt IGBT devices, global procurement of components. Adopt more comprehensive and mature protection technology.
2. Adopt high efficiency frequency group and resonance technology.
3. Use low-inductance circuit arrangement, large-scale digital circuit.
4. The heating speed is fast, the oxidative decarburization is less, and the power is saved greatly. Each time 1 ton of steel is heated, the power consumption is 320 degrees. It saves 20%-30% than the thyristor intermediate frequency.
5. Induction heating, the bar is heated to the required temperature in a very short time, greatly reducing metal oxidation, saving material and improving forging quality
6. Will not bring pollution on the grid side, the electric transformer does not heat, the compensation capacitor of the electric station does not heat, does not interfere with the work of other equipment.
7. Since feeds, 24 hours work, energy saving, environmental protection, cost reduction and labor expenditure .
Unique features of equipment heating:
1: Use special heat resistant insulation material.
2: Premixed high strength refractory materials are used.