Cutters, sickBlade high frequency hardening machine
les, harvester knives, and lawn mower quenching equipment, these are based on blade quenching as the main objective, kitchen knives, various boring knives, various harvester knives, lawn mower knives are common to all four types of artifacts. Sharp but not roll blade, so in order to protect their sharp performance, it is necessary to heat-treat the edge of its edge, so that its edge is more sharp, and the hardness of the workpiece after quenching increased 3-5 times, our professional equipment more focused Fight for solving technical problems. And this product is non-polluting, high efficiency and energy saving are their signs. Main features: quenching transformer adopts ferrite quenching transformer, the sensor is isolated safe voltage, power adjustable, fast heating, high efficiency, according to the requirements of the user processing the workpiece, generally 25-35KHz, suitable for hardened layer 2 -4mm, moderate hardened layer. The hardness meets the requirements, the deformation is small, and the hardened layer is even and moderate.
Kitchen knife, sickle, harvester knives and lawn mower quenching equipment basic parameters:
Unit of measure: Set Input voltage: 380V Product packaging: wooden packaging
Equipment model: 80 type Power: 80kw Oscillation frequency: 15HZ--35HZ
The main technical parameters of the equipment:
Working power Single-phase 380V/50Hz Cooling water flow (host) 32L/Min (0.1MPa)
Operating voltage range 360V/420V Cooling water flow (transformer) 29 L/Min (0.1MPa)
Maximum input current 120A Cooling pressure 0.1~0.3Mpa
Maximum output power 80KW Host weight 70Kg
Oscillation frequency 15~35KHz Transformer weight 90kg
Efficiency 90% Host Dimensions (mm3) 600×480×1360
Continuity of load 100% Transformer dimensions (mm3) 500×800×580
The above parameters are subject to actual conditions and may differ slightly.
Kitchen knife, sickle, harvester knife, lawn mower quenching equipment Main features:
1, using high power density, heating speed.
2, high production efficiency, less quenching defects, the use of rapid surface heating and cooling methods, short production cycle, high productivity. Since the hot time is short, the oxidative decarburization is slight, and because the surface is only heated, the center is still cold, so the quenching deformation is also small.
3, compact equipment, easy to use, good working conditions.
4, energy-saving, clean heat treatment, its energy consumption compared with chemical heat treatment and modulation and conditioning, etc. have several advantages, when the workpiece quenching the quality and the overall quality of the difference between the greater, the more obvious advantages, often have high additional Its quenching medium is usually water or an aqueous solution with additives, almost no soot, so the working environment is good.
3, can quench the surface of shaft parts, discs, bores, face and other parts.
4, a high degree of automation, according to the workpiece process programming, automatic heating, rotation, water spray, quick return.