Spline shaft quenching equipment, shock absorber shaft surface quenching equipment, can quench the shaft surface of spline shaft, shock absorber shaft, etc., walking speed can reach 400mm/min, for a spline shaft with a length of less than 1m quenching, only Requires 2-3 minutes, high quenching efficiency, good effect, and the application of such equipment is more extensive, not only for the heat treatment and quenching of various shaft surfaces, but also for the heat treatment of metal surfaces such as discs and guides.
"Splined shaft quenching equipment, shock absorber shaft surface quenching equipment" specification classification: (16KW, 26KW, 50KW, 80KW, 120KW, 160KW), oscillation frequency (20-40HZ), price in 6000/yuan - 68000/ Between yuan, choose the right high-frequency quenching equipment according to your own workpiece.
"Spinline shaft quenching equipment, shock absorber shaft surface quenching equipment" to 80kw high frequency quenching machine as an example of the main technical parameters:
Operating Power Single-phase 380V/50Hz Cooling Water Flow (Main Unit) 32L/Min (0.1MPa)
Operating voltage range 360V/420V Cooling water flow (transformer) 29 L/Min (0.1MPa)
Maximum input current 120A Cooling pressure 0.1~0.3Mpa
Maximum output power 80KW Host weight 70Kg
Oscillation frequency 15~35KHz Transformer weight 90kg
Efficiency 90% Host Dimensions (mm3) 600×480×1360
Continuity of load 100% Transformer dimensions (mm3) 500×800×580
"Splined shaft quenching equipment, shock absorber shaft surface quenching equipment" equipment of the main applications: a variety of shafts, crankshaft, rocker shaft, camshaft, hollow shaft, spline shaft, half shaft, direction shaft, transmission shaft , gear shaft, screw quenching and so on.
The splined shaft quenching sensor uses a ring-shaped inductor, which rotates while quenching while spraying water. The deep hardness of the quenched layer is very uniform.
Spline shaft quenching equipment, camshaft quenching equipment, drive shaft quenching equipment, motor shaft quenching equipment, including super audio series and intermediate frequency series. Super audio series really quenched layer depth requirements 1-3mm workpiece, IF quenching power really quenched layer depth required 2-20mm workpiece.
Our company specializes in surface quenching equipment for spline shafts, shock absorber shafts, etc. It is professionally designed and has a good brand and reputation. In terms of selection, there is a great deal of choice and we provide 50 models, 80 models, 120 models, 160 models, 200 models and many other models are available. When we select models, we will select the parameters according to your workpiece diameter, heating length, heating temperature, hardness required after quenching, etc. Our principle is to choose the right one, not to choose expensive ones, and to be suitable.