High Frequency Induction Heating Equipment for Hot Bending of Tower Angle Steel
Main features of the product: In the process of high frequency induction heating for angle steel of iron tower (decoration tower and process tower), a new type of contactless induction heating equipment, namely high frequency heating for transmission tower, is introduced, which replaces the traditional heating process of acetylene and oxygen. Welcome to consult whaisapp: 008613014650631. In the design of transmission tower, angle steel fire is divided into the following forms:
1. main slope fire
2. Strengthened angle steel fire cracker (also known as fire cracker sticker)
3. Fire Curve of Internal and External Cladding Angle Steel
In the production of high voltage transmission tower, communication wind tower, decorative tower and process tower, the tower factory has been using self-made simple heating methods (such as oxygen acetylene burner) to operate. There are three major problems:
1. High energy consumption, high cost and low heating efficiency.
2. Poor process quality and poor workshop environment;
3. High labor intensity and low efficiency;
4. It has oxide layer, large heating area and high production cost.
The usage of high strength steel in 500KV tower is increasing. Simple heating equipment such as oxygen and acetylene can not meet the needs of production process, and new equipment is urgently needed. Through the continuous development and application of the market, our company's "CYP-120 angle steel, steel bending electric heating crank machine" can be used for 50 *50 *4 to 200 *200 *24 range of thickness angle steel single-sided fire curvature, double-sided fire curvature, angle steel single curvature 50 degrees, double-sided back curvature 45 degrees of the operation. High frequency induction heating can be applied to plates 2 to 25 mm thick and 1150 mm wide, with a maximum bending angle of 150 degrees (hot bending profiles, plates and angle steels), flattening and heating of angle steels, etc.
The parameters of the new high frequency (ultra-audio, frequency < 50KHZ) pylon angle steel bending equipment are as follows:
Model: XXYP-160 (or 120KW/80KW/100KW)
Input power: 160KW
Input voltage: three-phase 380V 50-60HZ
Oscillation frequency: 15-25KHZ
Volume: Main control cabinet 650mm*480mm*1440mm
Transformer cabinet 500mm*800mm*580mm