Fire plug induction hardening equipment
The new generation of Ling cheng electronic miniature high-frequency
induction heating power supply is your ideal environmentally friendly heating
equipment. It mainly
changes the hardness of the metal material after the workpiece is heated and
The main application scope of the equipment: quenching heat treatment of
the outer circumference and end surface of the disc type parts of various flat
steel plates, shafts, gear sprocket wheels (step shafts, gear shafts,
camshafts, and half shafts).
Axis type fire plug rod induction hardening equipment high frequency
quenching equipment parameters:
Input power: 200KW
Input voltage: three-phase 380V 50-60HZ
Oscillation frequency: 2-8KHz
Shaft type fire plug rod induction hardening equipment range:
1. Length range of shaft quenching parts: no limit,
2. Quenching diameter parts range: ≤200mm
3. Hardened layer: 2-4mm
4, quenching hardness: HRC53-60
Shaft type fire plug rod induction hardening equipment
Quenching process: The workpiece is mounted on the quenching machine.
After the card is installed, the workpiece will automatically rise or move into
the contour sensor as soon as the switch is turned on. The workpiece will
automatically walk and start heating. When it is heated to the quenching
temperature, it will automatically move to the quenching. The zone
is quenched and the workpiece is manually replaced.
The shaft quenching equipment has these features that you don't know!
The shaft quenching equipment is the equipment for quenching the surface of the shaft workpiece. The purpose of the shaft quenching is to greatly improve the strength, hardness and wear resistance of the steel by changing the structure of the workpiece and then tempering at different temperatures. Fatigue
strength and toughness, etc., to meet the different requirements of various
mechanical parts and tools, the main configuration of the equipment includes:
medium frequency quenching power supply, vertical CNC quenching machine,
Quenching process of shaft quenching equipment: medium frequency quenching power supply and CNC vertical quenching machine are equipped with ring-shaped narrow heating belt sensor. The workpiece is mounted on the quenching machine and moves upward while rotating. As long as the switch is activated, the workpiece will automatically rise to In the ring induction coil, the workpiece rotates
automatically, automatic timing heating, water quenching, automatic drop to the
original position, manual replacement of the workpiece; the sensor with water
spray, so that the workpiece can be heated to the quenching temperature, the
water can be automatically opened immediately The valve is sprayed with water to ensure the depth of the hardened layer and the hardness of the quenching.
The main features of the shaft quenching equipment: mainly applicable to the outer circle and end face of various shafts, step shafts, gear shafts, camshafts, half shafts, disc type parts, etc.; low running cost, high degree of automation, automatic heating, Rotary, water spray, quick return and other processes; machine tool electrical control system, reserved quenching heating and cooling water control interface, according to the needs of the process, the quenching process and cooling process control, energy saving, environmental protection and pollution-free.