Shaft type high frequency quenching equipment
The main application range of the equipment: quenching heat treatment of the outer circumference and end surface of various gears, shafts (step shafts, gear shafts, camshafts, and half shafts).
Axis high frequency quenching equipment parameters:
Input voltage: three-phase 380V 50-60HZ
Oscillating frequency: 15-35KHz
Shaft type for hardened parts:
1. Quenching parts diameter range: φ20～φ120mm
2. Maximum length of quenching parts: 1000mm
3, the maximum weight of the quenched parts: 150Kg
Quenching process: The workpiece is mounted on the quenching machine. After the card is installed, the workpiece will automatically rise to the ring induction coil as soon as the switch is turned on. The workpiece will automatically rotate and rotate while moving upwards (automatic timing plus heating, water quenching) ), automatically descends to the original position and manually replaces the workpiece. The sensor is sprayed with water, so that after the workpiece is heated to the quenching temperature, the water spray solenoid valve can be automatically opened to spray water, which ensures the depth of the hardened layer and the hardness of the quenching.
The main advantages of CNC quenching machine: digital control, can control the quenching process and cooling process according to the process requirements, continuous scanning quenching, simultaneous quenching, segmental continuous scanning quenching, segmentation and simultaneous quenching. The equipment adopts the profile structure fuselage, which is low in cost, light in weight and economical and practical.