Steel Medium Frequency Melting Furnace

Steel medium frequency melting furnace Medium frequency melting furnace use The medium frequency induction furnace is also called the intermediate frequency coreless induction furnace. It is mainly used for the melting and heat preservation of black and non-ferrous metals and alloys such as alloy steel, copper and aluminum. It can also be used for the melting of precious metals such as gold and silver. Characteristics of steel
Chat Now

Product Details

Steel medium frequency melting furnace
Medium frequency melting
furnace use

 The medium frequency
induction furnace is also called the intermediate frequency coreless induction
furnace. It is mainly used for the melting and heat preservation of black and
non-ferrous metals and alloys such as alloy steel, copper and aluminum. It can
also be used for the melting of precious metals such as gold and silver.

Characteristics of steel
medium frequency melting furnace:

    1.The melting speed is fast, the solution temperature is uniform, the oxidation
loss is small, and the metal composition is uniform:

    2. Itcan be directly melted from the cold furnace, the solution can be completely
emptied, and the variety is convenient to replace;

    3.The furnace shell is made of cast aluminum alloy or steel shell structure, and
the floor space is small;

    4.Simple operation and maintenance, good working environment and low pollution;
    5. Itcan be configured with various forms such as rapid melting type and power
distribution type, and the configuration is flexible and convenient;

    6.Compared with the power frequency induction furnace, the electromagnetic
stirring of the medium frequency induction furnace is moderate, the service
life of the furnace lining is long, and the change of the load parameter can be
automatically tracked during operation without adjusting the compensation
capacity;

    7.Power adjustment is flexible, convenient, and can be continuously and smoothly
adjusted;

    8.The furnace body is easy to turn over and tilt, and electric, manual and
hydraulic tilting furnaces can be selected according to the needs.

    9. Itcan be started or stopped at any time in any state.

Steel medium frequency melting furnace features:
   Thecompany's power supply uses the most advanced electronic circuit control, with
over-voltage, over-current, voltage limit, current limit, phase loss,
under-pressure, under-water pressure, phase sequence automatic identification,
cooling water temperature over-limit alarm protection and many other
protections.
Features. Power factor automatic adjustment function. It can
realize the full power output to the furnace body regardless of the change of
the furnace condition during the whole cycle from cold charge to casting, so
that the amount of metal per k Wh is the most, and the same power heating time
is the shortest, which improves the labor productivity.
The
control line dedicated integrated box is completely isolated from the high
pressure area to keep the control room clean and cool.
Greatly
improve control board life and system reliability.

0.5 ton medium frequency melting furnace

Technical parameter device configuration

Name KGPS-0.5/400

Rated power 400KW

Rated capacity 0.5T

Supporting transformer capacity 400KVA

Line voltage 380V 50-60HZ

IF frequency 2000HZ

IF voltage 750V Phase

DC voltage 500V Phase

DC current 800A Phase

Rated temperature 1600 ° C

Melting time 30-50min

Closed cooling tower (circulating water) LNB-30T/h

Complete equipment configuration

Fast KGPS IF power supply

Compensation capacitor cabinet

Furnace 1 or 2

Reducer RZS431

Water-cooled cable 240mm2 two

Diaphragm Manual information

 1545225397(1)

mmexport1481591821728

IMG_20190110_103829_副本


Inquiry