Metal Melting Furnace Equipment

Metal Melting Furnace Equipment

Metal smelting furnace equipment is applied to the smelting and heating of metal materials such as steel, stainless steel, copper, aluminum, gold, and silver; the smelting capacity is from 3KG to 200KG, and various metal strips, metal yttrium, etc. can be smelted.
Chat Now

Product Details

Metal melting furnace equipment can be divided into steel shell and aluminum shell metal melting furnace, we generally recommend the steel shell. Steel shell intermediate frequency smelting furnace consists of medium frequency power supply cabinet, compensation capacitor bank, steel shell furnace body, yoke and water cooling cable, hydraulic station, tilting furnace control box and so on. It is mainly used for melting steel, iron, copper, aluminum and alloys, etc. It has high melting efficiency, good energy-saving effect, uniform metal components, less burning loss, rapid temperature rise, easy temperature control, etc., and is suitable for various metal melting occasions.


Metal smelting furnace equipment product advantages
1. The power consumption of steel smelting tons is 550-600KW.h under normal working conditions;
2. The power factor is maintained over 0.96 during the whole process, and no additional compensation device is required;
3. Effectively control higher harmonics, do not interfere with surrounding electrical equipment, and do not pollute the power grid;
4. Wide frequency adaptability range, keeping the best resonance state during the melting process;
5. zero voltage scanning soft start mode, can be started or stopped at any state at any time, no impact on the power supply;
6. rapid smelting, low production costs; pollution is small, in line with national environmental protection requirements;
7. can be directly from the cold furnace melting, the solution can be all empty, easy to replace the melt species;
8. It is flexible and convenient for power adjustment, and can be adjusted continuously and smoothly; the temperature is even and easy to control; there is less oxidation loss, and the metal composition is uniform;
9. The furnace shell is made of steel structure or cast aluminum alloy, which occupies a small area; the furnace body is easy to flip and dump, and manual, electric, and hydraulic tilting furnace modes are available;
10. leakage alarm device, timely and effective protection of personal and equipment safety;

The maximum heating capacity of each smelting furnace of the metal smelting furnace equipment is listed in the following table. When the cooling furnace is used, the smelting time per furnace is 50-60 minutes. When the hot furnace is used, the smelting time per furnace is 20-30 minutes.


Main specifications

Maximum input power

Smelting capacity of commonly used materials

Steel, stainless steel

Brass, copper, gold, silver

Aluminum and aluminum alloys

LC-15 melting furnace

15KW

3KG

10KG

3KG

LC-25 melting furnace

25KW

5KG

20KG

5KG

LC -35 smelting furnace

35KW

10KG

30KG

10KG

LC -45 Melting Furnace

45KW

18KG

50KG

18KG

LC -70 melting furnace

70KW

25KG

100KG

25KG

LC-90 melting furnace

90KW

40KG

120KG

40KG

LC-110 melting furnace

110KW

50KG

150KG

50KG

LC-160 melting furnace

160KW

100KG

250KG

100KG

LC -240 melting furnace

240KW

150KG

400KG

150KG

LC -300 melting furnace

300KW

200KG

500KG


The above is the basic information of the metal smelting furnace equipment. If you want to know more product information, product pictures or videos, please contact us in time!


Inquiry